NVR

How to set up Motion Detection (MD)
This article will describe, how to set up Motion Detection on the recorder. When setting up Motion Detection (MD), you must be aware of the following: ...
Wed, 31 May, 2017 at 11:22 AM
How to set up the recorder from the Wizard and log in
When you boot up the NVR, the first time, you will see the "Wizard". The wizard is a 4 step guide:                                      ...
Mon, 28 Jan, 2019 at 11:22 AM
How to set up Video Cover?
First of all - what is "Video Cover" ? Video Cover is covering up areas in the cameras viewing angle, rendering them not visible, in both live...
Tue, 6 Jun, 2017 at 8:39 AM
How to setup Email notification on the NVR
Prior to this guide, you should have completed the following configurations: Added the necessary cameras. Configured Motion Detection. Configured Rec...
Tue, 12 Sep, 2017 at 10:37 AM
How to connect upto 16 cameras to the NVR16
This articles will describe, how to connect up to 16 cameras (IPC) to the NVR16. Some detail in the articles applies to the NVR4 and NVR8. The NVR16 re...
Mon, 18 Dec, 2017 at 10:18 AM
How does the PoE work on the NVR
This article covers the PoE functionality on the NVR8 & NVR16, the following data applies for both systems: The NVR's in general does not ...
Wed, 13 Dec, 2017 at 8:23 AM
How do I disable popup warning about 'No disk' on a NVR/THDR?
If you are using a NVR/THDR without a harddisk installed, the system will show you a warning message upon boot. The warning look like this: To get ...
Mon, 18 Dec, 2017 at 9:52 AM
CCTV Basic
Video
Tue, 9 Jan, 2018 at 9:43 AM
How do I export recordings from the NVR, from the web interface?
This article describes, how you can export recordings from the NVR, from the web interface. Before you can complete this guide, you must make sure: Th...
Thu, 7 Mar, 2019 at 8:24 AM