EoC Facts:

  • G.hn range is 2-200MHz.
  • 200-300MHz is not useable (Trough the controller)
  • TV range out of the controller is from 300MHz
  • TV-in attenuation is ~5dB for 32/2 EoC & ~10dB for 64/4 EoC
  • TV-in attenuation is ~4dB for 32/2-B EoC & ~8dB for 64/4-B EoC
  • G.hn output level is ~100dBµV (CTRL & EPC)
  • Max total G.hn bandwidth is 1.6 Gbps (DS/US as UDP traffic)
  • Low latency, down to ~1ms
  • ”In-Room” Wi-Fi, Supporting
    • Dual band  (2.4GHz MIMO & 5GHz MU-MIMO)
    • Multiple SSIDs (up to 8 pr. EP)
    • Multiple VLANs (1 per SSID = 8 + 1 RJ45)
    • L2 Client Isolation
  • Total of 500 SSIDs & 128 VLANs (129 incl. VLAN10)


Login:

  • Connect Laptop to the controller on Port 1 and open a browser
  • Type in ”setup.eoc/” in the Address Field & press <Enter>
  • Login in with the Admin account (‘admin’ / ‘admin’)


VLAN & Controller ports:

The default configuration for the ethernet port on the controller is:

  • Port 1 : Setup (VLAN 10) - pass-through disabled
  • Port 2 : Private (VLAN 50) - pass-through disabled
  • Port 3 : Guest (VLAN 100) - pass-through disabled
  • Port 4 : IPTV (VLAN 80) - pass-through disabled

                Plug Gable In…


Port 2-4 is changeable, from the web interface. You can’t remove setup from port 1.


Setup Wi-Fi:

  • SSID: TriaxSetup_XXXX
  • Key: SetupPasswordXXXX
  • XXXX = Last 4 digits of CTRL MAC


Group settings:


Group nameSSIDsEthernet rule

Guest & Private

’Guest’ & ‘Private’

IPTV

Guest Only

Guest’

IPTV

PassThrough

Guest’,

Pass-through

Private only

Private’

IPTV

Setup

TriaxSetup_xxxx’

Setup


Return path filer:

  • TV 300-862MHz : 3dB
  • G.hn 1-200MHz: 1.5dB
  • Excellent for combining EoC/TV