Kopfstellen

What is failsafe?
Failsafe = safe mode When you software update any system, there will always be a risk of failure. When upgrading the headend, this can happen as well....
Mi, 23 Nov, 2016 um 10:01 VORMITTAGS
Was ist "Best Practice" bei der Einrichtung der Kopfstelle?
Wenn Sie eine Kopfstelle (TDX als auch TDH800) installieren und konfigurieren, gibt es einige "Regeln" oder "Richtlinien", die Sie beac...
Fr, 7 Jun, 2019 um 6:55 VORMITTAGS
Opening service.csv in Microsoft Excel (SW 4.x)
When you export the 'Service List' from the headend, you might want to open it in Microsoft Excel. In software 4.x (up to 4.0.1.36329), the delim...
Mi, 23 Nov, 2016 um 9:47 VORMITTAGS
What is, the 'Network Tab' in the GUI?
The article will explain a bit about the 'Network Tab' in the GUI. This tab is important, if you want to control/edit: LCN / HD LCN DVB...
Di, 14 Mär, 2017 um 2:22 NACHMITTAGS
How do I get the "IP Out Service List"?
It is possible to get the list of services at IP out in the following formats: XSPF M3U Extended M3U Extended++ M3U   XSPF XSPF can be accesse...
Di, 10 Jan, 2017 um 8:38 VORMITTAGS
Why is the time periode, in my log file short?
The log file on the TDX and the TDH800 is constructed as a "Single file Rotation Log" This means, that the log overwrites itself, when it reaches ...
Fr, 27 Jan, 2017 um 9:29 VORMITTAGS
Using an Alternative EPG/EIT Source on IPTV IN/Out
In some cases, there will be a need for an alternative EIT source. Often the EIT data is received via DVB-S/T/C. But if you don't have any DVB frontends...
Mi, 24 Apr, 2019 um 8:35 VORMITTAGS
Configuring and using SNMP
The TDX supports SNMP (only 'Read' commands) - if a SNMP license is purchased and installed. This gives you the opportunity to monitor the headend w...
Fr, 24 Feb, 2017 um 12:36 NACHMITTAGS
How to save/backup my configuration
Even thou the configuration is stored in the internal flash and the SD Card, you might want to make a backup of your configuration. To do this, on the T...
Mo, 27 Feb, 2017 um 7:38 VORMITTAGS
How to understand the System Monitoring (LED's)
On the headend and modules, there are LED's indicating the status of the system. Alle these LED's combined, gives you a overview of the system state...
Di, 7 Mär, 2017 um 9:16 VORMITTAGS