TRIAX Technical Support

EoC devices:

TV-in:

• TV-in RF connector on EoC Controller - combining the TV and G.hn signals on the EoC out ports
• TV-in loops through 300MHz and above (200...300 MHz is filtered away by the controller)
• TV-in attenuation is ~5dB for CT32 and ~10dB for CT64
• TV-in attenuation is ~4dB for CT32-B and ~8dB for CT64-B

G.hn:

• G.hn Wave 2 ITU-T G.9960 / ITU-T G.9963 (G.hn PHY) G.9962 (MAC & DLL)
• G.hn operates in frequency range 2...200 MHz
• G.hn output level is ~100dBµV (CT & EPC/EMC/MCC)
• Max total G.hn throughput is 1.6 Gbps (DS/US as UDP traffic)
• Low latency - down to ~1ms
• Configurable G.hn notch filtering - allowing to omit or attenuate desired parts of the 2...200 MHz range
• Configurable G.hn ports combining/bundling - supporting up to 64 Endpoints on the same coax cabling
• Configurable G.hn Endpoint isolation - for network separation in MDU (appartments) installations
• Dynamic G.hn bandwidth management with configurable bandwidth limitation per Endpoint

Network:

• 10/100/1000 Gbps duplex enternet ports
• Up to 128 VLANs (VIDs 1-4095), with access tagging, trunking and hybrid (EMC1 up to 16 trunk VLANs)
• L2 Client Isolation - configurable per VLAN
• QoS - VLAN CoS (PCP) and IP DSCP (ToS)
• IGMPv1 and IGMPv2 - Snooping and multicast filtering
• IGMP querier in EoC controller - participating in automatic election process
• Private Network Zones - just-like-home local network experience in room/cabin (Endpoint as router with DHCP server)

Wi-Fi:

• Dual band Wi-Fi (AC1200)
• 2.4 GHz - 802.11 g/n, 2x2 MIMO, 20/40 MHz channel width, 300 Mbps
• 5 GHz - 802.11 n/ac, 2x2 MU-MIMO, 20/40/80 MHz channel width, 867 Mbps
• WPA/WPA2 Personal and Enterprise (RADIUS authentication)
• Beamforming
• Bandsteering (Between 2.4 GHz and 5 GHz on same Wi-Fi Endpoint)
• Channel selection - Automatic or manual
• Tx power - Automatic or manual
• Up to 200 Wi-Fi clients per Endpoint
• Up to 8 dual band SSIDs or 16 single band SSIDs per Wi-Fi Endpoint
• Private SSIDs - just-like-home Wi-Fi experience, allowing in room/cabin Wi-Fi communication between connected devices, while still being isolated from clients connected to other Endpoints (VLAN client isolation must be enabled)

Management and Monitoring:

• Web GUI
• REST API
• SNMPv2 and SNMPv3
• SSH
• RADIUS authentication for management access

Max Configuration Entities in EoC Controller:

• VLANs: 128
• SSIDs: 70
• Private Network Zones: 70
• Endpoints: 70
• Endpoints configuration groups: 71
• G.hn notch filters: 10
• L2 Client Isolation trusted hosts (MAC whitelist): 7
• NTP servers: 4
• SSH keys: 4
• Site GUI page EoC Controllers: 15

Login:

• Connect the Laptop to the controller on Port 1 and open a browser
• Type in ”setup.eoc/” or "192.168.10.1" in the Address Field & press <Enter>
• Login in with the Admin account (‘admin’ / ‘admin’)

VLAN & Controller ports:

The default configuration for the ethernet port on the controller is:

• Port 1: Configuration (DHCP server enabled)
• Port 2: Default (VLAN 1)
• Port 3: Default (VLAN 1)
• Port 4: Default (VLAN 1)

Port 1-4 are changeable, from the web interface. Eth1 is not suitable for multicast.

Setup Wi-Fi:

• SSID: TriaxSetup_XXXX
• Key: SetupPasswordXXXX
• XXXX = Last 4 digits of CTRL MAC

Group settings:

Return path filter (383900):

• TV 300...862MHz : 3dB
• G.hn 2...200MHz: 1.5dB

Return path filter, narrow G.hn (383903):

• TV 110...862MHz : 3dB
• G.hn 2...85MHz: 1.5dB

Return path filter, Power pass (393910):

• TV 300...862MHz : 3.5dB
• G.hn 2...200MHz: 1.5dB
• AC/DC pass (<65V/<1,5A)

HP Filter 258MHz F (383901):

• 258...2400MHz : <1.2dB
• 1...204MHz: >40dB