TDX/TDH Modules
When adding a new frontend or backend module, you should check if the software version is equal to the currently running software: Click 'System'...
Tue, 12 Oct, 2021 at 6:23 AM
This article applies only to the TDX This article will briefly describe, how to configure the IP-Out Backend, on the TDX. This is just the basic setup, no...
Tue, 1 Mar, 2022 at 8:33 AM
The IP-output module (Article number: 492072) is designed to handle a maximum of: up to and including sw. 4.1.1.x 94 services or 700 Mbit/s Fro...
Wed, 28 Aug, 2019 at 10:35 AM
The AV-input module is using a modified VGA connector. The pinouts are shown in the .pdf file.
Mon, 18 Dec, 2017 at 8:04 AM
The software release 4.4.1.39167 offers the possibility to modify the TSID (Transport_stream_ID) and ONID (Original_Network_ID) when configuring IP-out on I...
Mon, 15 Jan, 2018 at 7:36 AM
Payload monitor shows wrong available bandwidth when set to 8 MHz channel spacing. If using COFDM output modules, the payload monitor shows the corre...
Wed, 31 Jan, 2018 at 12:29 PM
When using PAL output and selecting "AFD Full frame" scaling, the output sometimes freezes. This happens due to high bandwidth input. Solutio...
Wed, 31 Jan, 2018 at 12:21 PM
The BER (Bit Error Rate) read-out on the input modules, should always show "0.0e + 00". The read-out value is measured AFTER the tuner and the f...
Wed, 31 Jan, 2018 at 1:32 PM
Originally the maximum number of IP-out services (SPTS using AUX port) was 96 services pr. IP-out module. When introducing the new feature " Suppo...
Fri, 18 May, 2018 at 8:59 AM