Default management IP Address

The default management IP-address of the TDX / TDH800 is : 192.168.0.100
You must make sure your computer is on the same network, in order to access the TDX / TDH800.


HowTo reset the management IP Address to default

The management IP-address of a TDX / TDH800 can be returned to the default IP-address (192.168.0.100) by using the ID switch.


  1. Turn off the power to the main unit.
  2. Set the ID switch on the main unit to "7".
  3. Turn on the power.


The four LEDs flash red and yellow until the process of resetting the IP address has been completed.

The LEDs show green-constant if the reset process was successful.


  1. Turn off the power to the main unit.
  2. Set the ID switch on the main unit back to the initial setting.
  3. Turn on the power to the main unit.


The IP address has been reset to the default IP-address: 192.168.0.100.




Changing Your Computers IP-Address

If necessary, you can change your computer's IP-address to a static IP address.
You need to select an IP-address in the same network scope, that is not in use (eg. 192.168.0.150).

If you don't know how to change the IP-address, follow one of these Windows guides, to change the IP-address: "Change TCP/IP settings" or "How to assign a static IP-address"