TDX/TDH general
To update the TDX/TDH800, follow this guide. Download the SW4.x software from this site: Software Unzip/Extract the software. Login to the TDX. ...
Thu, 10 Oct, 2024 at 2:45 PM
You need a PC tuner device which support the 'BDA' standard. A 'BDA' driver for this device must then be installed on your PC.
When the...
Wed, 23 Nov, 2016 at 9:37 AM
Default management IP Address The default management IP-address of the TDX / TDH800 is : 192.168.0.100 You must make sure your computer is on t...
Thu, 20 Apr, 2023 at 1:03 PM
In some rare cases, it's necessary to completely erase the internal flash (spansion0) on the headend. Please contact support before doing this. Pe...
Mon, 23 Apr, 2018 at 1:38 PM
This article covers both TDX and TDH. If a software update fails the headend will boot into failsafe. From failsafe mode it is possible to perform a softw...
Tue, 8 Mar, 2022 at 9:27 AM
This article will describe, how to perform a complete 'Factory Reset' of a TDX / TDH800. This will only work on systems running SW 3.x or newer. ...
Mon, 19 Sep, 2022 at 10:21 AM
Setting up remote access to the TDX, requires a public IP address, but connecting a 'host' directly to the internet is never a good idea. You exp...
Wed, 2 Oct, 2019 at 7:53 AM
To change the IP address on the TDX/TDH800, please follow this guide:
Click on 'Admin', in the top right corner.
Click on 'I...
Wed, 23 Nov, 2016 at 10:14 AM
To extract the debug log, from the headend, add "/debuglog" to the URL of the headend (this goes for both the TDX and the TDH800).
...
Wed, 23 Nov, 2016 at 10:05 AM
Failsafe = safe mode
When you software update any system, there will always be a risk of failure. When upgrading the headend, this can happen as well.
...
Mon, 27 Feb, 2017 at 1:14 PM