TDX/TDH general

What is failsafe?
Failsafe = safe mode When you software update any system, there will always be a risk of failure. When upgrading the headend, this can happen as well. ...
Mon, 27 Feb, 2017 at 2:14 PM
What is 'Best practise' when setting up the headend?
When you installing and configuring a headend (both TDX and TDH800), there are some "rules" or "guidelines" you must follow. This is wh...
Wed, 28 Aug, 2019 at 11:42 AM
Opening service.csv in Microsoft Excel (SW 4.x)
When you export the 'Service List' from the headend, you might want to open it in Microsoft Excel. In software 4.x (up to 4.0.1.36329), the del...
Mon, 21 Nov, 2016 at 11:38 AM
What is, the 'Network Tab' in the GUI?
The article will explain a bit about the 'Network Tab' in the GUI. This tab is important, if you want to control/edit: LCN / HD LCN D...
Tue, 14 Mar, 2017 at 3:18 PM
How do I get the "IP Out Service List"?
It is possible to get the list of services at IP out in the following formats: XSPF M3U Extended M3U Extended++ M3U   XSPF XSPF can be accesse...
Tue, 10 Jan, 2017 at 9:37 AM
Why is the time periode, in my log file short?
The log file on the TDX and the TDH800 is constructed as a "Single file Rotation Log" This means, that the log overwrites itself, when it reaches ...
Fri, 27 Jan, 2017 at 10:30 AM
Using an Alternative EIT Source on IPTV IN/Out
In some cases, there will be a need for an alternative EIT source. Often the EIT data is received via DVB-S/T/C. But if you don't have any DVB frontend...
Tue, 10 Nov, 2020 at 3:16 PM
Configuring and using SNMP
The TDX supports SNMP (only 'Read' commands) - if a SNMP license is purchased and installed. This gives you the opportunity to monitor the headend...
Wed, 27 Mar, 2019 at 1:22 PM
How to save/backup my configuration
Even though the configuration is stored in the internal flash and the SD Card, you might want to make a backup of your configuration. To do this, on the...
Tue, 3 Oct, 2017 at 9:41 AM
How to understand the System Monitoring (LED's)
On the headend and modules, there are LED's indicating the status of the system. Alle these LED's combined, gives you a overview of the system sta...
Tue, 7 Mar, 2017 at 10:17 AM