TDX/TDH general
This article applies only to TDX ! This article will describe, how to set up a 'Multi-Unit'. First of all, a 'Multi-Unit' is simply 2 or ...
Fri, 24 Jun, 2022 at 8:57 AM
This article is for TDX/TDH installations running very old software (sw. ver. 1.x / 2.x / 3.x) TRIAX strongly recommend updating the TDX/TDH software to ve...
Fri, 3 Mar, 2023 at 10:52 AM
The SD-card problems are typically caused by one of these reasons: Heat and/or moist is causing bad connection between the SD-card and the socket. Multip...
Fri, 21 Apr, 2023 at 9:45 AM
The feature "use special EIT PID" cannot be saved from GUI in sw 4.x. This is a software bug. This bug is corrected in software release 4.5.1...
Wed, 20 Mar, 2019 at 7:05 AM
When upgrading your TDX / TDH800 from the early SW1.16.x software version to the latest, you must do that in steps. Please follow this short guide, to avoid...
Mon, 28 Aug, 2017 at 12:00 PM
We have seen a few TV-sets rebooting due to EIT / EPG data overload. In all cases, the EIT settings on the TDX was set to "Full Actual - Full Other...
Tue, 24 Oct, 2017 at 1:28 PM
When configuring the service "Das Erste HD" and giving it SID 39, the HbbTV shows the wrong service. Solution: Don't use the SID 39
Tue, 30 Jan, 2018 at 2:39 PM
The BER (Bit Error Rate) read-out on the input modules, should always show "0.0e + 00". The read-out value is measured AFTER the first error corr...
Tue, 30 Jan, 2018 at 2:45 PM
Sometimes the input modules fails during a software update. This is typically due to bad connection or an unresponsive module. Solution: 1. Remove the...
Wed, 31 Jan, 2018 at 1:27 PM