Kopfstellen

How to Software Upgrade the headend (Sw3.x -> SW4.x)
To update the TDX/TDH800, follow this guide. Download the SW4.x software from the website. Unzip/Extract the software. Login to the TDX. ...
Di, 7 Mär, 2017 um 11:29 VORMITTAGS
How to use 'DVB Stream Explorer Standard Edition' for recording a transport stream
You need a PC tuner device which support the 'BDA' standard. A 'BDA' driver for this device must then be installed on your PC. When the...
Mi, 23 Nov, 2016 um 9:38 VORMITTAGS
Standard IP Adresse
Standard IP Addresse Die Standard IP Adresse der TDX / TDH 800 ist : 192.168.0.100 Die Netzwerkkarte ihres Computers muß sich im selben Netz...
Mo, 27 Feb, 2017 um 1:36 NACHMITTAGS
Formattieren des Dateisystems im Flashspeicher
In einzelnen seltenen Fällen ist es erforderlich, den internen Prozessor (spansion0) der TDX Kopfstelle zu löschen. ...
Do, 1 Dez, 2016 um 12:46 NACHMITTAGS
How to force the headend in failsafe mode
If a upgrade fails and the headend don't boot into failsafe, or for some reason you need to boot in failsafe mode. Then you can force the system, to ...
Mi, 23 Nov, 2016 um 10:22 VORMITTAGS
How long does a software upgrade take?
This matrix is made, to give you an overview on a software upgrade, on your own system. Even if your system doesn’t match a scenario 100%, you will still...
Di, 22 Aug, 2017 um 6:52 VORMITTAGS
How to 'Factory Reset' the headend
This article will describe, how to perform a complete 'Factory Reset' of a TDX / TDH800. This will only work on systems running SW 3.0 or never. ...
Mo, 27 Feb, 2017 um 2:36 NACHMITTAGS
TDX remote access (Through router/firewall)
Das Einrichten des Fernzugriffs auf das TDX erfordert eine öffentliche IP-Adresse. Abhängig von Ihrer bestehenden Einrichtung kann es mehrere Lösungen ge...
Do, 31 Mär, 2022 um 1:54 NACHMITTAGS
Changing the management IP address
To change the IP address on the TDX/TDH800, please follow this guide: Click on 'Admin', in the top right corner. Click on 'I...
Di, 29 Nov, 2016 um 12:59 NACHMITTAGS
How to extract debug log
To extract the debug log, from the headend, add "/debuglog" to the URL of the headend (this goes for both the TDX and the TDH800). ...
Mi, 23 Nov, 2016 um 10:05 VORMITTAGS