TDX/TDH general

How to Software Upgrade the headend (Sw3.x -> SW4.x)
To update the TDX/TDH800, follow this guide. Download the SW4.x software from this site: Software Unzip/Extract the software. Login to the TDX. ...
Wed, 2 Mar, 2022 at 8:32 AM
How to use 'DVB Stream Explorer Standard Edition' for recording a transport stream
You need a PC tuner device which support the 'BDA' standard. A 'BDA' driver for this device must then be installed on your PC. When the...
Wed, 23 Nov, 2016 at 10:37 AM
TDX/TDH: Default management IP-address / Reset the IP-address
Default management IP Address The default management IP-address of the TDX / TDH800 is : 192.168.0.100 You must make sure your computer is on t...
Thu, 20 Apr, 2023 at 2:03 PM
How to format filesystem in Flash
In some rare cases, it's necessary to completely erase the internal flash (spansion0) on the headend. Please contact support before doing this. Pe...
Mon, 23 Apr, 2018 at 2:38 PM
How to force the headend in failsafe mode
This article covers both TDX and TDH. If a software update fails the headend will boot into failsafe. From failsafe mode it is possible to perform a softw...
Tue, 8 Mar, 2022 at 10:27 AM
How long does a software upgrade take?
This matrix is made, to give you an overview on a software upgrade, on your own system. Even if your system doesn’t match a scenario 100%, you will still...
Tue, 22 Aug, 2017 at 7:51 AM
How to 'Factory Reset' the headend
This article will describe, how to perform a complete 'Factory Reset' of a TDX / TDH800. This will only work on systems running SW 3.x or newer. ...
Mon, 19 Sep, 2022 at 11:21 AM
TDX remote access (Through router/firewall)
Setting up remote access to the TDX, requires a public IP address, but connecting a 'host' directly to the internet is never a good idea. You exp...
Wed, 2 Oct, 2019 at 8:53 AM
Changing the management IP address
To change the IP address on the TDX/TDH800, please follow this guide: Click on 'Admin', in the top right corner. Click on 'I...
Wed, 23 Nov, 2016 at 11:14 AM
How to extract debug log
To extract the debug log, from the headend, add "/debuglog" to the URL of the headend (this goes for both the TDX and the TDH800). ...
Wed, 23 Nov, 2016 at 11:05 AM