TDX/TDH general
This article is for TDX/TDH installations running very old software (sw. ver. 1.x / 2.x / 3.x) TRIAX strongly recommend updating the TDX/TDH software to ve...
Fri, 3 Mar, 2023 at 10:52 AM
The SD-card problems are typically caused by one of these reasons: Heat and/or moist is causing bad connection between the SD-card and the socket. Multip...
Fri, 21 Apr, 2023 at 9:45 AM
The feature "use special EIT PID" cannot be saved from GUI in sw 4.x. This is a software bug. This bug is corrected in software release 4.5.1...
Wed, 20 Mar, 2019 at 7:05 AM
When upgrading your TDX / TDH800 from the early SW1.16.x software version to the latest, you must do that in steps. Please follow this short guide, to avoid...
Mon, 28 Aug, 2017 at 12:00 PM
We have seen a few TV-sets rebooting due to EIT / EPG data overload. In all cases, the EIT settings on the TDX was set to "Full Actual - Full Other...
Tue, 24 Oct, 2017 at 1:28 PM
When configuring the service "Das Erste HD" and giving it SID 39, the HbbTV shows the wrong service. Solution: Don't use the SID 39
Tue, 30 Jan, 2018 at 2:39 PM
The BER (Bit Error Rate) read-out on the input modules, should always show "0.0e + 00". The read-out value is measured AFTER the first error corr...
Tue, 30 Jan, 2018 at 2:45 PM
Sometimes the input modules fails during a software update. This is typically due to bad connection or an unresponsive module. Solution: 1. Remove the...
Wed, 31 Jan, 2018 at 1:27 PM
A lot of professional CA modules (Conditional Access Modules) can handle up to 10 services. Never the less, it is the number of PID’s (Packet Identifiers) ...
Thu, 14 Jun, 2018 at 1:48 PM